(Summary description)1、 Operators must work with certificates.
2、 Operators must wear personal protective equipment.
3、 The operator must be familiar with the structure, performance, working principle and commissioning method of the equipment to be operated, carefully read the operating instructions and operate in strict accordance with the equipment operating procedures- Dongguan die casting machine parts
IV Die casting machine operation:
1. before starting the machine, the operator must make a comprehensive inspection on the equipment, instruments, lubrication and cooling systems and the safety protection devices of the equipment to ensure that they are intact and effective.
2. the operator must wear gloves to prevent hot hands when installing inserts.
3. operators (including others) shall not enter the dangerous area during equipment operation. To prevent bumps and burns.
4. when filling the holding furnace with aluminum liquid, the operator (including others) shall keep away from the forklift and holding furnace to prevent injury caused by aluminum liquid splashing.
5、 During the process of disassembling and assembling the mold, the slings and methods shall be correctly selected, and the mold shall be checked whether there is a steel tightening device to prevent the mold from falling and damaging the equipment and personnel.
1. operation of holding furnace:
2. new furnaces and furnaces that have not been used for a long time must be dried before use to prevent people from being burned by the splashing of molten aluminum.
3. the operator shall regularly check whether the conductor is scorched, damaged or overlapped with the exposed metal part of the equipment to prevent electric shock.
4. when the holding furnace is filled with aluminum liquid, the power must be cut off.
5. when cleaning the dross of molten aluminum, the lifting sling shall be correctly selected for lifting the heating cover, and the operation shall be carried out according to the operating procedures; The heating cover shall be placed on the ground and shall not be suspended in the air all the time; When the furnace temperature is reduced and the slag is cleaned, the cleaning personnel shall wear corresponding protective articles (such as gloves and goggles); After the slag is cleaned, the heating cover shall be restored to its original position, the wiring shall be correct, and the protective cover shall be installed securely.

• Categories:Industry news
• Author:
• Origin:
• Time of issue:2021-12-27 14:00
• Views: